Today on the review is a format that I have not held in my hands for 2 years, if not more. Voltage range: 0.7 – 8.0 V Managing the board in the first place seems unusual, but if you work with me for 2-3 minutes, you get used to the boxing mod very quickly. — additional drip type Atomizer type: RDA The only nitpick is that, as in most Chinese mods, at the moment the Fire button is pressed five times to turn off the mod, a voltage pulse is applied (the device fries), but this is inherent in most, and in the end it is a budget device. The buttons are pressed pleasantly, they do not rattle, no extraneous sounds are noticed, but if you want to remove them really, nevertheless, when using the noise, you will not be disturbed. At work, everything is also excellent, overestimation / underestimation of power was also not detected, no missfires were noticed, the resistance does not dance, it starts without delay. In any case, I will say that I cannot find fault with the quality of the device. Operating mode: VW, TC (NI200, SS, TI) , VV, BYPASS, VPC, Boost (Soft / Norm / Hard), Memory I’ll start the review with a squonk. The display is colorful, bright, with various color options and the ability to adjust the brightness. — adapter for 18650 battery Centaurus Quest BF 100w As for the decoration, I still can’t figure out if I like it or not. By weight, the box mod cannot be called light either, but we met heavier specimens. Everything is fine, but it sticks out very much. The connector part itself is 26 mm, but without overhanging, atoms up to 28 mm can also be wound. The modes in fashion are all the most common, in addition, it is possible to save your presets. Working with the mod is a pleasure, everything can be easily found and configured without any key combinations. — liquid storage bottle Color: see photo Height: 30.4mm with drip tip / 23.4mm without drip tip < br />Connector: 510, gold-plated pin When viewed from the side, the protruding panel immediately catches the eye, where the screen and control buttons are located, but the strongly protruding Type-C hole is most striking. — Centaurus Solo RDA Temperature range: 200℉ – 600℉ / 100℃ – 315℃ Silicone smells a little. The battery compartment cover is on the thread, the thread stroke is soft and smooth, the thread is of medium pitch, in general, you get https://jiji.co.ke/55-canvas-shoes/casual into the thread almost immediately (we have seen worse thread options). Weight: 41.5 g – Type-C cable The fit is impressive. There is no overcharging of the battery. I did not notice any traces of glue at the joints of the placement of decorative elements and slots, as, for example, it was with Thelema Solo 100w. There are nitpicks about the squonk bottle: I started testing the bottle by filling it somewhere by 1/3, on the one hand we made a fairly large volume of the bottle, as much as 9.5 ml, and on the other hand, due to the large volume, the underfilled bottle has a lot crush. Diameter: 24mm
Centaurus Solo RDA The mod is powered by the Quest 2.0 Chip. In general, I like the appearance of the box mod, but I will probably remain neutral to the decor elements.

Lost Vape Centaurus Quest BF 100w kit review

Generally comfortable. We have two bottles in the kit: one for squonk mode (with a finger hole in the front), the second bottle for carrying and using in drip mode (the bottle is covered with plastic in the front). Weight: 165 g. A bottle for carrying is certainly a good thing, but pulling out / inserting it all the time is a dubious pleasure. Given the support for 21700 on board, as well as the presence of a capacious bottle, it feels quite compact in the hand, a comparison can be made with the average Drag-shaped box mod. — regular pin 2 pcs. (squonk pin installed in RDA) Body material: stainless steel Resistance supported: 0.1 – 5.0Ω Looks nice, but only from a distance. Dimensions: 86.1 x 51.1 x 31.6 mm. Power: 5 – 100 W — Centaurus Quest BF mod There is enough information on the screen. Chip: Quest 2.0 The refill hole is no bigger or smaller than on most pod mods and pod systems, you can’t miss, it could be worse. Refilling takes place through the bottom of the bottles, which is covered with a small metal cap. We meet a squonk kit controlled by the Centaurus Quest BF 100w board. Maximum current: up to 35 A Capacity: 1.2ml Color: see photo. Case material: zinc plastic eco-leather Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharging / overdischarging
Let’s look at the specifications: Capacity of vials: 9.5 ml – instruction manual
Components – spare screws Screen / diagonal: color, 0.96 inches >Micro USB Port/Charging: Type-C, Charging Current 1.65A Lost Vape Centaurus Quest BF 100w kit review. Connector type: steel 510, spring-loaded pin Power supply: 1 x 18650 / 20700 / 21700 format – warranty card – spare orings I also didn’t really like the plastic frame of the bottle, it looks flimsy to me. And the cap on the bottle could be made more serious. The box mod is equipped with a Type-C input, with the ability to quickly charge.
Our kit consists of two devices: Centaurus Quest BF 100w box mod and Centaurus Solo RDA drip atomizer. Today we will “jump”, and plus we will try the debut atomizer from Lost Vape. Firstly, I don’t really like eco-leather, and secondly, next to the eco-leather, a non-skinny plastic element with a carbon-like pattern was stuck on.